WM1x21 (f), WM2x20 (r). with black enamelled rims.
Racing type. Rear with tubular stay & lifting handle.
Petrol tank, black with gold lining. Twin Coventry Movement fillers with front fitted petrol balance pipe. Single bolt damper arm fixing and 8 bolt tank fixing. Oil tank mounted on rear frame tube with 2 Coventry Movement fillers, one either side of machine.
4 valve 349cc with cast iron TT type fully radial cylinder head.18mm central plug and oval inlet port. Rockers mounted on plates bolted to the cylinder head. Forward mounted ML racing magneto running at half engine speed. RR50 crankcases, drive side crankcase with 8 webs and timing side crankcase with a single web. Round base to cylinder barrel with oil feed to rear.
8” front and rear, coupled with steel shoes. RHS foot operated.
4 speed close ratio TT replica type gearbox with foot change on LHS using rocking pedal. Sheet steel chainguard to top run of primary chain. ‘Angle iron’ rear chainguard.
1 3/32” 10TT 27 with twin float chambers.
Twin 1 1/2” low-level downpipes into Rudge ‘can’ type silencers and 6” fishtails.
1” TT pattern non adjustable handlebars with Bowden single cable handlebar controlled damper and folded type clutch and inverted levers. Pressed steel central stand. Open ended ‘D’ section forks with brazed up fork bridge. Spanner adjusted fork shock absorber.
Footbrake on LHS and gearchange on RHS.
New RudgeSpares - Forum - Technical Drawings - Archive information - Library books - Spares lists - Technical advice
Become part of this active and supportive Club today! From only £21 you can join us and the fantastic support offered as a Member.